Affiliate disclosure: We may earn a commission from links on this page at no extra cost to you.

Polyaspartic vs Epoxy

Pick polyaspartic if you want a one-day install, UV resistance and a longer life, and you are hiring a pro. Pick epoxy if you want to DIY and keep the cost down.

Last updated: October 2026By Garage Hobbies Team

Polyaspartic vs epoxy comparison graphic with a yellow VS badge

Quick comparison

FactorPolyasparticEpoxy
Pro cost per sq ft$5 to $12$4 to $10
2-car garage (400 to 576 sq ft)$2,000 to $6,900$1,600 to $5,800
Full cure1 to 2 daysUp to 1 week
Back to parkingAbout 24 hoursAbout 3 days to a week
UV resistanceExcellentPoor to fair
Lifespan10 to 20+ years3 to 5 years water-based, 10 to 20 years solid
FlexibilityHighly flexibleMore brittle
DIY friendlyNoYes

Source: HomeGuide polyaspartic cost guide and HomeGuide epoxy cost guide, checked October 29, 2026. Prices change often.

Rust-Oleum EpoxyShield 2.5-Car Garage Floor KitRust-Oleum EpoxyShield 2.5-Car Garage Floor Kit
Best forA low-cost DIY epoxy floorKey specWater-based two-part epoxy

$185at Home Depot

Rust-Oleum RockSolid Polycuramine Garage Floor Coating KitRust-Oleum RockSolid Polycuramine Garage Floor Coating Kit
Best forDIYers who want a fast, polyaspartic-like turnaroundKey specPolycuramine, drive on after about 24 hours

$179.991-car 90 oz kit at Ace Hardware

ArmorPoxy ArmorClad Epoxy Floor KitArmorPoxy ArmorClad Epoxy Floor Kit
Best forA thicker DIY epoxy floorKey spec100% solids base

From $419300 sq ft kit at ArmorPoxy

Xtreme Polishing Systems Rockhard Garage Poly (polyaspartic)
Best forExperienced DIYers who want a true polyasparticKey specPolyaspartic, 2 gallons

$2402 gallons at Xtreme Polishing Systems

Prices checked October 29, 2026. Prices change, check the retailer for the current price.

Video: Polyaspartic vs Epoxy - Garage Floors by Marine X

Quick verdict

Polyaspartic wins on speed, UV and lifespan. Epoxy wins on price and DIY. For a pro install in a sunny or busy garage, pick polyaspartic. For a weekend DIY job on a dry slab, pick epoxy.

What is the difference between polyaspartic and epoxy?

Epoxy is a two-part resin that goes on thick (10 to 20 mils per coat) and cures slowly. Polyaspartic is a type of polyurea. It goes on thin (2 to 6 mils per coat), cures in hours and stays flexible, per HomeGuide.

Concrete Network says polyaspartic bonds strongly with concrete and is UV stable, while epoxy is more prone to chipping and peeling over time.

Polyaspartic vs epoxy cost

HomeGuide puts polyaspartic at $5 to $12 per sq ft installed (materials $2 to $6, labor $3 to $6). That is $1,400 to $4,700 for a 1-car garage, $2,000 to $6,900 for a 2-car and $2,900 to $10,400 for a 3-car. Epoxy runs $4 to $10 per sq ft, or $1,600 to $5,800 for a 2-car garage.

Bob Vila lists polyaspartic at $4 to $9 per sq ft and says a moisture barrier adds about $1 per sq ft.

Example math for a 450 sq ft 2-car floor: polyaspartic is about $2,250 to $5,400, and epoxy is about $1,800 to $4,500. See our full epoxy garage floor cost guide.

Cure time and when you can park

Polyaspartic: walk on it in a few hours and park in about 24 hours. Bob Vila says you can walk on it in about 3 to 4 hours. Concrete Network says a 2 or 3-car garage can be done in one day.

Epoxy: walk on it after about 12 to 24 hours and park after about 3 days to a week. Concrete Network says epoxy should not go down below 50°F. HomeGuide says polyaspartic can be applied from -30°F to 140°F.

Durability, UV and lifespan

Polyaspartic resists UV yellowing, abrasion and chemicals, and it lasts 10 to 20+ years per HomeGuide. Concrete Network says it can last 15+ years when installed right.

Epoxy can yellow in the sun. Water-based epoxy may need a recoat every 3 to 5 years. Solid epoxy lasts 10 to 20 years.

Can you DIY polyaspartic?

You can, but it is hard. Bob Vila says it can set in about 10 minutes, so mistakes lead to peeling or bubbles. Fixing failed work can double or triple the cost.

Concrete Network calls epoxy a good DIY pick because of its longer working time.

Tip: if you DIY, prep is the job. Clean, grind or etch, fix cracks and test for moisture.

Downsides of each

Polyaspartic costs more and needs a pro. It gives off fumes during install, can be slippery when wet (add grit or flakes) and is not for slabs with high moisture.

Epoxy cures slowly, can yellow and is more brittle. It needs 50°F or warmer, and it can peel on a damp slab.

Which should you pick?

DIY coating kits to compare

These are DIY kit examples, not pro installs. Prices were checked October 29, 2026.

Rust-Oleum EpoxyShield 2.5-Car Garage Floor Kit

Budget DIY epoxy

1. Rust-Oleum EpoxyShield 2.5-Car Garage Floor Kit

EpoxyShield is the cheapest kit here at $185, and the concrete etch comes in the box. Rust-Oleum says you can walk on it in 1 to 2 days and drive on it in 3 days. The tradeoff is a long wait to park, and good prep decides how well it holds.

Key specs

  • Water-based two-part epoxy
  • Concrete etch included
  • Rust-Oleum: walk on in 1 to 2 days, drive on in 3 days

Pros

  • Cheapest kit here
  • Etch included

Cons

  • Long wait to park
  • Prep is key

$185 at Home Depot

View on Rust-Oleum
Rust-Oleum RockSolid Polycuramine Garage Floor Coating Kit

DIY middle ground

2. Rust-Oleum RockSolid Polycuramine Garage Floor Coating Kit

RockSolid is the fast-cure DIY option. Rust-Oleum says you can walk on it in about 8 to 10 hours and drive on it after about 24 hours. It is polycuramine, not a true polyaspartic, and Rust-Oleum claims it is "20 times stronger than epoxy."

Key specs

  • 1-car 90 oz kit covers about 200 to 250 sq ft
  • 2.5-car 180 oz kit covers about 450 to 500 sq ft
  • Rust-Oleum: walk on in about 8 to 10 hours, drive on after about 24 hours
  • Best applied at 40 to 90°F

Pros

  • Park after about 24 hours
  • Small 1-car kit available for $179.99

Cons

  • Not a true polyaspartic
  • Strength claim comes from Rust-Oleum

$179.99 1-car 90 oz kit at Ace Hardware

View on Rust-Oleum
ArmorPoxy ArmorClad Epoxy Floor Kit

Thick DIY epoxy system

3. ArmorPoxy ArmorClad Epoxy Floor Kit

ArmorClad is a thick epoxy system with a 100% solids base. It starts at $419 for 300 sq ft, and ArmorPoxy's FAQ lists up to $2,289 for 1,200 sq ft with primer and topcoat. It is dry to the touch in 24 hours, but ArmorPoxy says to wait 4 to 5 days for cars.

Key specs

  • Sizes: 300, 600, 900 and 1,200 sq ft
  • 100% solids base
  • Up to $2,289 for 1,200 sq ft with primer and topcoat, per ArmorPoxy's FAQ
  • Dry to touch in 24 hours, cars after 4 to 5 days

Pros

  • Thick 100% solids base
  • Several kit sizes

Cons

  • Costs the most here
  • Longest wait for cars

From $419 300 sq ft kit at ArmorPoxy

View on ArmorPoxy

DIY polyaspartic for experienced DIYers

4. Xtreme Polishing Systems Rockhard Garage Poly (polyaspartic)

Rockhard Garage Poly is a true polyaspartic you can buy as a DIYer, at $240 for 2 gallons. XPS says most polyaspartic floors allow foot traffic within hours and cars within 24 hours. The working time is short, so plan on a helper and careful prep.

Key specs

  • 2 gallons
  • XPS does not list coverage on the product page
  • XPS: foot traffic within hours, cars within 24 hours for most polyaspartic floors

Pros

  • True polyaspartic
  • Fast return to parking

Cons

  • Short working time
  • Best with a helper and good prep

$240 2 gallons at Xtreme Polishing Systems

View on Xtreme Polishing Systems

Frequently asked questions

Is polyaspartic better than epoxy for a garage floor?

For a pro install, usually yes: it cures in a day, resists UV and lasts longer. Epoxy is cheaper and easier to DIY.

How much more does polyaspartic cost than epoxy?

About $1 to $2 more per sq ft on HomeGuide's ranges: $5 to $12 vs $4 to $10.

How long before I can park on polyaspartic?

About 24 hours. Epoxy needs about 3 days to a week.

Does epoxy turn yellow?

It can in sunlight. Polyaspartic resists UV yellowing.

Can I put polyaspartic over epoxy?

Many installers use a polyaspartic topcoat over an epoxy or flake base. Ask your installer what system they use.

Is RockSolid polyaspartic?

No. Rust-Oleum calls it polycuramine. It is a fast-cure DIY coating, not a true polyaspartic.

How long does a polyaspartic floor last?

About 10 to 20+ years per HomeGuide when installed and kept up well.