Affiliate disclosure: We may earn a commission from links on this page at no extra cost to you.
Garage Door Opener Installation Cost
Most homeowners pay about $220 to $600 to have a garage door opener installed, opener included. Labor alone runs about $130 to $400, and wall-mount or smart models cost more.
Last updated: October 2026By Garage Hobbies Team

Quick comparison
| Opener type | Opener only | Replaced, with labor |
|---|---|---|
| Chain drive | $150 to $250 | $300 to $600 |
| Belt drive | $200 to $450 | $300 to $700 |
| Screw drive | $200 to $500 | $350 to $650 |
| Direct drive | $300 to $500 | $400 to $800 |
Source: HomeGuide garage door opener installation cost, checked October 31, 2026. Wall-mount (jackshaft) openers run $500 to $750 for the unit alone, per Angi.
| Product / Best for / Key spec | Best for | Key spec | Price |
|---|---|---|---|
| Best forDIY installs and myQ app users | Key specChain and belt models with myQ | $150 to $500opener only, per HomeGuide | |
LiftMaster | Best forA pro install from a door dealer | Key specBelt and wall-mount models | $250 to $500opener only, per HomeGuide |
| Best forAladdin Connect app users | Key specChain, belt and screw drive models | $150 to $450opener only, per HomeGuide |
Prices checked October 31, 2026. Prices change, check the retailer for the current price.
How much does garage door opener installation cost?
Angi and HomeAdvisor put the average at $379, with a normal range of $218 to $540 including the opener (Angi). HomeGuide gives a higher range of $300 to $900, with a $600 national average, a $220 low and a $1,100 high.
Plan on about $300 to $600 for a standard chain or belt opener, installed. These are source estimates, not a quote.
Garage door opener cost by type
Chain drive is cheapest but loudest. See the HomeGuide ranges in the table above. Angi's opener-only ranges are chain $150 to $250, belt $160 to $350, screw $150 to $300, direct $280 to $500, and wall-mount (jackshaft) $500 to $750.
Belt is quieter, which suits an attached garage. Wall-mount frees the ceiling for a lift, rack or golf setup but needs a compatible torsion-shaft door. Compare the best garage door openers before you buy.
Labor cost to install a garage door opener
HomeAdvisor lists $60 to $80 an hour and 2 to 6 hours, about $130 to $510. Angi lists $65 to $85 an hour. HomeGuide puts labor at $150 to $400.
Most installers include removing the old opener, but some charge extra. Angi says to budget about an extra half hour if you do not remove it yourself. A second opener roughly doubles labor, per Angi.
Home Depot and Lowe's installation cost
The Home Depot lists opener installation starting at $178. It includes removal and haul-away of the old opener, an extension kit install if needed, and a door inspection and adjustment. Home Depot's cost page lists labor at $178 to $238 and openers at $159 to $499.
Lowe's does not post a set price online. Its install page says to pick an opener and add installation at checkout, and it gives quotes for other door work. Price can vary by store and area, so check before you buy.
Extra costs to plan for
Extras add to the installed price. If there is no ceiling outlet, hire a licensed electrician and follow local codes.
- Extension kit for doors over 7 to 8 ft: $45 to $100 (Angi, HomeGuide).
- Battery backup: $50 to $150 (Angi).
- Safety sensors: $25 to $100 (HomeGuide).
- Keypads: $20 to $70. Remotes: $20 to $40 each (HomeGuide).
- Automatic lock: $100 to $300 (Angi).
- Running power to a detached garage: $10 to $25 per linear foot (HomeGuide).
- Smart-feature subscriptions: about $300 over ten years (Angi).
Replace or repair your opener?
HomeGuide lists opener repair at $75 to $300 and a full motor replacement with labor at $300 to $800 depending on type. If the opener is old, loud, or the repair costs close to half of a new install, replacing usually makes more sense.
A worn door or bad springs will not be fixed by a new opener. Spring work is dangerous. Never adjust torsion springs yourself; call a door pro.
DIY vs pro installation
DIY saves the $130 to $400 labor. Chamberlain sells openers made for DIY install with app-based 3D steps. You need a ladder, basic tools, a helper and a nearby ceiling outlet.
Hire a pro if the door is heavy or unbalanced, the springs need work, you want a wall-mount unit, or you need new wiring. For electrical work, follow local codes and use a licensed pro.
Garage door opener price ranges by brand
These are typical opener-only price ranges by brand from HomeGuide, checked October 31, 2026. Add labor to get your total. Prices change often.

Wide budget range
1. Chamberlain
Chamberlain sells chain and belt drive openers from budget to premium. Its site lists openers built for DIY installation, with 3D steps in the BILT app. Most models use the myQ app.
Key specs
- Chain and belt models with myQ
- DIY installation with BILT app steps
Pros
- Wide price range
- Made for DIY install
- myQ app control
Cons
- Some smart features may need a paid plan
- Tall doors may need an extension kit
$150 to $500 opener only, per HomeGuide
View on ChamberlainPro-installed pick
2. LiftMaster
LiftMaster is the pro line from the same company as Chamberlain, usually sold and installed by garage door dealers. It also makes wall-mount openers that free up ceiling space, but those cost more and need a compatible door.
Key specs
- Belt and wall-mount models
- Wall-mount units need a compatible door
Pros
- Sold through pro installers
- Wall-mount options
Cons
- Higher price
- Wall mounts need a door check
$250 to $500 opener only, per HomeGuide
View on LiftMaster
Budget belt pick
3. Genie
Genie sells chain, belt and screw drive openers, plus wall-mount models. Smart models use the Aladdin Connect app.
Key specs
- Chain, belt and screw drive models
- Aladdin Connect on smart models
Pros
- Low starting price
- Many drive types
Cons
- HPc ratings are not the same as AC horsepower
- Check door limits
$150 to $450 opener only, per HomeGuide
View on GenieHow to save on garage door opener installation
Compare the full job, not just the opener price. Insulate the door at the same time if you plan to heat or cool the garage. See our garage door insulation kit guide.
- Get 2 to 3 quotes that list the opener, labor, removal and extras.
- Buy a chain or belt opener instead of wall-mount unless you need the ceiling space.
- Check if removal and haul-away are included.
- Skip paid smart add-ons you will not use.
- Do both doors on the same visit if you need two openers.
Is a pro install worth it?
For most people a pro install at about $130 to $400 labor buys a safe, adjusted door and a warranty-friendly job. Use our best garage door openers guide to pick the opener first, and garage ideas to plan the space.
If you plan a car lift, a wall-mount opener can help free the ceiling. Plan clearance with our best car lift for home garage guide.
Frequently asked questions
How much does it cost to install a garage door opener?
About $218 to $540 with the opener, average $379, per Angi. HomeGuide puts the average at $600.
What is the labor cost to install a garage door opener?
About $130 to $510, based on $60 to $80 an hour for 2 to 6 hours (HomeAdvisor). HomeGuide says $150 to $400.
How much does Home Depot charge to install a garage door opener?
Home Depot lists opener installation starting at $178, with old opener removal and haul-away included. The opener is extra.
How much does Lowe's charge to install a garage door opener?
Lowe's does not post a set price online. You add installation at checkout or get a quote, and price varies by area.
How much does it cost to install a LiftMaster garage door opener?
LiftMaster openers run about $250 to $500 for the unit, per HomeGuide, plus $150 to $400 labor. Wall-mount models cost more.
Which garage door opener type is cheapest?
Chain drive, at about $150 to $250 for the unit.
Can I install a garage door opener myself?
Yes, many openers are made for DIY install. Hire a pro for spring work, wiring or a heavy, unbalanced door.
Related buying guides
- Best Garage Door Opener for Your GarageThe Chamberlain B2215T is our overall pick for a belt-drive opener with smart control and battery backup. Choose a wall-mount model when your door supports it and you need ceiling space.
- Best Garage Door Insulation KitFor most steel pan doors, the Owens Corning R-8 fiberglass kit is the best garage door insulation kit. On a budget, pick Insulfoam EPS foam panels or a Reach Barrier reflective kit.
- Mini Split CostA pro-installed single-zone mini split costs about $2,000 to $5,000, with most people paying around $3,000. A garage mini split averages about $3,500, and wiring or insulation can add more.
- Epoxy Garage Floor CostA pro epoxy garage floor costs about $4 to $10 per square foot, or $1,600 to $5,800 for a typical 2-car garage. DIY kits run about $200 to $700, but prep takes most of the work.
- Best Car Lift for Home Garage UseThe BendPak HD-9 is our best overall lift for parking and general service. QuickJack 5000TL works where space is tight, while MaxJax M7K adds two-post access.
Related guides
- Garage door insulation kitsInsulate the door while it is being worked on.
- Mini split costWhat heating and cooling a garage costs.
- Epoxy garage floor costBudget your next garage upgrade.
- Belt vs chain drive garage door openerNoise, cost and upkeep compared.
- LiftMaster vs ChamberlainSame maker, different prices and warranties.